|
|
We have quality products in Leg, Knee & Foot Exercises. All our models are efficient and display quality in Physiotherapy Equipments. |
 |
~:~ AMP-032890 : PED-O-CYCLE ~:~ |
|
|
 |
Tubular steel construction, fitted with resistance control device. For reactivation and mobilization of the joints and for strengthening the leg
muscles. Suitable for patient unable to sit on a regular exercise bicycle.
|
|
 |
| |
|
|
~:~ AMP-032892 : ACTIVATOR ~:~ |
|
|
 |
| A unique exerciser for the lower extremities. The pedaling movement can be carried out by Legs. It can be fixed and adjusted in matter of seconds to limb size and to the degree of flexion or extension. Chrome-plated unit with adjustable resistance is very light and easily portable and can be attached to any tubular chair, wheel chair or bed (Supplied without chair).
|
|
|
| |
|
|
~:~ AMP-032893 : LEG EXERCISER ~:~ |
|
|
 |
Tubular steel constructed unit is without resistance mechanism. Suitable for leg exercises with free paddling movement for patients unable to sit on a regular exercise bicycle. Stove enameled finish.
|
|
|
| |
|
|
~:~ AMP-032901 : NIRMAL QUADRICEPS EXERCISE TABLE ~:~ |
|
|
 |
Designed for effective administration of progressive resistance exercise to the knee joints muscle groups. Both Quadriceps & Hamstrings can be
exercised with out changing the position of the patients. Resistance bar is calibrated so that resistance can be varied from 1/2 and 3/4 & maximum without adding weight, the unit is fitted with foam padded Seat & Back rest for comfort. The Table is: 70cm x 76cm x 135cm high. The torque unit consists two lever arms one of which hold the weights while the other arm provide contact with the patient. Exercising of the opposite leg is done by lifting of torque unit from its bracket & placing it on the
other end of the table. By changing angle between the two arms, maximum or minimum resistance can be given at any point in the range. Comes with 5 weight plates of 1kg and 2 of 0.5kg each, total 6kg. Powder coated frame beautifully finished.
|
|
|
| |
|
|
~:~ AMP-032913 : QUADRICEPS BOARD ~:~ |
|
|
 |
Made of polished teakwood base with slots and two hinged moveable board which can be set at various angles and permits bed patient to do
quadriceps exercises. |
|
|
| |
|
|
~:~ AMP-032931 : HIP CIRCUMDUCTOR ~:~ |
|
|
 |
For complete cirucumduction of hip joint, rotation plate is tilted at 8 degree angle over the angular frame to avoid knee bending. Standing base is
covered with corrugated rubber sheet. Diameter of circumduction is adjustable.
|
|
|
| |
|
|
~:~ AMP-032932 : HEEL EXERCISER ~:~ |
|
|
 |
Specially designed unit for exercising the heel & tarsus muscle groups. Unit is fitted on a laminated wooden base and patient can exercise while sitting
on chair. The resistance can be increased or decreased by shifting the foot holder up or down on the numbered lever arm. The pressing lever shaft is marked and fitted with a marker to measure and record the improvement.
|
|
|
| |
|
|
~:~ AMP-032933 : ANKLE EXERCISER ~:~ |
|
|
 |
Painted aluminum boot with strap to hold the foot is mounted on a laminated base with Stainless steel sheet bracket having Two springs for ankle (Dorsi
and Plantar flexion) exercises. Resistance can be increased further by tightening spring's nut. Degree of flexion can be measured and recorded.
|
|
|
| |
|
|
~:~ AMP-032942 : PARALLEL WALKING BAR (Adult) ~:~ |
|
|
 |
| Length 3.60 meters, with Hand rails made of P.V.C. sheated iron tubing. Height & width adjusting arms made of chrome plated steel tubing of 38mm dia. Outer uprights of thick steel tubing (50 mm dia). Mounted on strong hard-wood reinforced platform with inclination on both ends & covered with non slip matting. Height is adjustable from 72cm to 111cm and Width from 45cm to 67cm. Adjustment can easily be done by means of setting pins at the required holes and can further be stabilized by tightening the screws. Comes with detachable polished hard-wood abduction board, which fits in the holes in the middle of the platform. Steel uprights have powder coated finish.
|
|
|
| |
|
|
~:~ AMP-032945 : BARS, PARALLEL, ADULT (without Platform) ~:~ |
|
|
 |
| Length 3meter, with bars hand rails made of P.V.C. sheathed Iron tubing. Height adjusting arms made of chrome plated steel tubing of 38mm outer dia. and
Uprights made of 50mm dia. steel tubing. Height is adjustable from 73cm - 111cm. Uprights are mounted on two non-slip aluminum bases with iron angle reinforcement. Adjustments can easily be done by means of setting pins at the required holes & can further be stabilized by tightening the screws. inside Width of the Bars are 60cm. Uprights with powder coated finish.
|
|
|
| |
|
|
~:~ AMP-032955 : TRAINING STAIRS (Single Side) ~:~ |
|
|
 |
Sturdily built in two sections for installation in a straight single side.
FEATURES :
- Steps arrangement : Four 15cm steps lead to a platform size 76 x 76 x 60cm high.
- Steps. : 76cm wide and 28cm deep.
- Hand Rails. : All-around hardwood handrails at two different heights to accommodate adults and children.
- Construction. : Steps and platform made of commercial board, hand rails
with supporting bars made out of hardwood. Polished natural wood finish.
Note : Require assembly at destination.
|
|
|
| |
|
|
~:~ AMP-032956 : EXERCISE STAIRCASE (Straight type, 60cm wide) ~:~ |
|
|
 |
| Sturdily built in two sections for installation in a straight line. Step arrangement : Four 15cm steps on one side leading to a platform of 60cm x 60cm. First step moves into the 2nd to make it a bus step of 30cm height. Six 10cm steps on the other side. Steps are 60cm wide and 23cm deep. Two sets of Harwood hand rails at different height to accommodate adult and children. Steps and platform made of commercial board 12 mm thickness covered with non-slip matting. Sides and supporting frame of steps made of commercial board of 18mm thickness. Hand Rails and supporting bars are made of solid hardwood with natural wood finish.
|
|
|
| |
